There is no perfect thing in the world, and so is the popular stainless steel mixing tank crystallizer. Its advantages and disadvantages are balanced. Generally speaking, the advantages of stainless steel mixing tank crystallizer are that its structure is not complex, easy to operate, and is good at it. It has no requirements for mixing tank and is suitable for many aspects.

　　Defects of Stainless Steel Stirring Tank Mold
　　1. This kind of tank is generally small and can only be produced intermittently. Therefore, the production capacity is small. If the tank body is too large, not only manufacturing difficulties but also the mixing of radial and axial direction will not be uniform.
　　2. It is difficult to fine adjust and control the crystallization process with this equipment, such as adjusting the crystal growth rate and controlling the crystal size.

　　This kind of crystallizer is usually made of stainless steel, which requires smooth inner surface, non-sticky crystal wall, easy cleaning and sterilization. The new type of stainless steel stirring tank crystallizer is actually a stirring tank reactor, but its stirring structure has been changed to suit the case of solid in the tank. There are two stirring shafts on the stirring shaft of this kind of crystallizer. In the middle, the liquid is stirred, and the bottom stirring can stir up the precipitated crystals.

　　There is a jacket outside for the heat exchange inside and outside the tank, usually with PH and temperature measuring probe. The discharge outlet is below. The manhole on the stainless steel mixing tank is used as the feed outlet, and also for cleaning and maintenance.