Detailed introduction
　　Milk storage tank is a stainless steel storage tank for milk, full name direct-cooled milk storage tank, direct-cooled milk storage tank, stainless steel direct-cooled milk storage tank. Direct-cooled storage tank is mainly used for cooling and storing fresh milk. It can also cool and store other liquid materials. It is the most ideal cooling and storage equipment for pastures, dairy stations, dairy factories, food factories, beverage factories and pharmaceutical industries. Direct-cooled milk storage tank adopts full automatic control, large area cooling of straight wall, through full automatic control system, one-step in-place observation operation, so that the cold raw milk rapidly drops to the required temperature and keeps constant temperature, prevents bacterial reproduction, and keeps the raw milk in a fresh state. The electric control box and milk can are integrated structure, which is convenient for operation. The combination of milk tank equipment and electric control box can automatically control the temperature of refrigeration system.
　　Compressor has high-voltage pressure fault protection and motor overload protection (high-voltage protection value is 2.0MPa, low-voltage shutdown value is 0.2MPa). If the above-mentioned fault occurs, the circuit will automatically disconnect, alarm, and the compressor will stop working. At this time, the failure must be checked and eliminated before the reset button can be pressed to continue working. When the milk tank needs to be pre-cooled, it can start manually. The agitator motor works synchronously with the compressor. When the compressor stops working, if necessary, the agitator switch can be switched to the automatic gear. At this time, the agitator will enter an adjustable intermittent rotation.
　　When milk is stored for a long time, if the temperature of milk in the tank is higher than the set temperature (which can be adjusted), the compressor will start itself and refrigerate until the temperature of milk in the tank drops below the set temperature (which can be adjusted) and automatically shuts down, so as to achieve the purpose of keeping cold. Direct-cooled milk storage tank adopts imported compressor and safety protection system performance, energy-saving, fully enclosed compressor. Polyurethane foaming process is used for insulation layer, which has good insulation effect. Direct-cooled milk storage tank is made of high-quality stainless steel. It is sanitary and clean without dead angle and can be cleaned online. Welcome to customize!