Stainless steel magnetic stirring tank is an indispensable production equipment in food, pharmaceutical, biological engineering and other industries, with high sanitary requirements. Mainly used for heating, stirring, stirring, dispensing and so on. In production, in order to better maintain and maintain the equipment of magnetic stirring tank, after using magnetic stirring tank, we can refer to the following points for maintenance and maintenance.

　　1. Because the bearing bears the full load of the mixing tank, good lubrication is closely related to the life of the bearing. It directly affects the service life and operation rate of the mixing tank. Therefore, the lubricant injected must be clean and well sealed, and the main oil I. The rotating positions of the mixing groove are rotary bearings; roller bearings; all gears, movable bearings and sliding planes.
　　2. Under the information, whether the various parts of the mixing tank are working properly.

　　3. Newly installed tyres are easy to loosen, so they need to be checked regularly.
　　4. Remove dust and other impurities from the floor plane of the movable device to prevent the movable bearing from moving on the chassis when the mixer encounters materials that are not easy to break, thus causing serious accidents.
　　5. When the temperature of bearing oil rises, it should stop checking immediately and eliminate the causes.

　　6. Pay attention to inspecting the wear degree of wear parts, and pay attention to replacing wear parts at any time.
　　7. When the rotating gear is running, if there is an impact sound, it should be stopped immediately and checked, and eliminated in time.